Model No. Ordering Part No. Description SKU No.
GV-DSP LPR V3 630-DSLPR-300 GV-DSP LPR V3 1 port Linux 84-DSLPR-300U
 
| Home | Contact Us | Careers |  
 

  • Introduction
  • Features
  • Specifications
  • Accessories
  • Download

The GV-DSP LPR is a Linux-based license plate recognition system built in a small box. Integrating with a Web server, the GV-DSP LPR can host its own Web site and compare captured license plates with the database downloaded from GV-AS Manager and open a gate barrier when there is a match.

The GV-DSP LPR can also deliver live view images and recognized plate numbers, date and time to the GV-System for security surveillance.


  • Non-PC based solution for 1 port traffic or mobile license plate recognition
  • Wide operating temperature range
  • Web-based configuration for image, security settings and firmware upgrade
  • Recognition triggered by video motion detection or sensor inputs
  • Opening a gate barrier when a captured license plate matches the database
  • Manageable by GV-AS Manager access control system
  • Digital watermark
  • Hardware watchdog
  • IP address filtering
  • WiFi
  • UMTS
  • GPS tracking

System Requirement
OS 32-bit
64-bit
Browser
GV-ASManager GV-ASManager V4.0 & 4.1 (for GV-DSP LPR V2.0)
GV-ASManager V4.1 (for GV-DSP LPR V2.01)
GV-ASManager V4.2 (for GV-DSP LPR V2.02)
GV-ASManager V4.2.1 (for GV-DSP LPR V2.03)
Operation
Video Input/Output 1 Video In, 1 TV Out
Video Compression JPEG
Live Resolutions NTSC 360 x 240, 720 x 480
PAL 360 x 288, 720 x 576
Live Frame Rate D1 NTSC 1, 3, 5
PAL 1, 3, 5
CIF NTSC 1, 3, 5, 7, 10
PAL 1, 3, 5, 8, 12
Image Setting Brightness, Contrast, Saturation, Hue
Alarm and Event Management Events triggered by motion detection or sensor inputs Relay outputs triggered by sensor inputs or matched license plate numbers
Mechanical
Connectors Video 1 input (BNC port)
Ethernet RJ-45, 10/100Base-T
USB 1 USB 2.0 (only for UMTS)
TV-Out 1 output (BNC port)
Local Storage Micro-SD/SDHC memory card slot (for Class 6 card or above)
I/O Port 2 digital inputs, 2 digital outputs (DC 5V, 5 mA)
GPS 1 RS-232
Web Interface
Security IP address filtering
Installation Web-based configuration
Management Maintenance Firmware upgrade through Web browser
Protocol HTTP, TCP, UDP, DHCP, NTP, DDNS
Language English ,German , Hebrew ,Simplified Chinese, Traditional Chinese
General
Operation Temperature -20°C ~ 55°C (-4°F ~ 131°F)
Dimensions (W x D x H) 123 x 106 x 25 (mm) / 4.84 x 4.17 x 0.98 (in)
Weight 0.345 (kg) / 0.76 (lb)
Region
Country Support Australia, Austria, Belgium, Brazil, Bulgaria, Chile, China, Columbia, Cyprus, Czech Republic, France, Germany, Guernsey, Hong Kong, Hungary, Ireland, Israel, Italy, Malaysia, Mexico, New Zealand, Norway, Poland, Portugal, Russia, South Africa, Spain, Taiwan, UK, USA
Note:
1. The Weigand interface is NOT functional.
2. The GV-DSP-LPR V3 (firmware V1.05 or later) does not support UAE engine.
3. The relay output can only drive a maximum load of DC 5V, 5 mA. Working in conjunction with the GV-Relay V2 module, it can drive a heavier load of up to AC 250V 10A, DC 100V 5A.
4. Specifications are subject to change without notice.

Model No Details
GV-GPS Receiver GV-GPS Receiver is a Global Position System receiver, allowing you to perform vehicle tracking and location verification functions.
GV-Relay V2 Working with this module, GV-DSP LPR can drive the loads of relay outputs over 5 volts.

 
Firmware  
Software Download & Upgrading  
Version History  
User's Manual zip
Datasheet pdf

Item No. (Sales Part No.) Description
{item} {Des}

  © 2014 GeoVision Inc. All Right Reserved. Warranty | Terms of Use | Reporting Piracy
 
     
f