GV-VS14 is a powerful H.264 Video Server with compact size and supports multiple applications. It supports 4-channel full D1 real-time video and audio encoding, fully integrated with GV-NVR to form the most powerful IP solution. It also supports over 50 PTZ models to fulfill various project demands. It can record video to a local USB storage, forming the smallest video recorder. With GPS and UMTS/ 3G/ 3.5G/ 4G support, it provides GIS solution integrated with GV-GIS. It can also active Tampering Alarm alerts when a tampering event happens to prevent crime events.
30 fps per channel; 120 fps in total for 4 channels
25 fps per channel; 100 fps in total for 4 channels
704 x 480, 704 x 480 de-interlace, 352 x 240
352 x 240, 176 x 112
704 x 576, 704 x 576 de-interlace, 352 x 288
352 x 288, 176 x 144
Configurable frame rate and bandwidth,
Constant and variable bitrate
Brightness, Contrast, Hue, Saturation
Schedule, Sensor Input, Motion Detection
Store Video (AVI format),
Send e-mails with captured images,
Upload captured images to FTP Server,
Monitor through Center V2, VSM and GV-GIS,
Activate relay outputs to control external devices
Remote upgrade by HTTP,
Firmware upgrade utility included in the Software DVD
USB storage device (optional)
Client PC Requirements
Microsoft Internet Explorer 7.x or above running on Windows XP / Vista / 7 / 8 / Server 2008 / Server 2012
IP address filtering
10/100 Base-T Ethernet,
802.11b/g/n Wireless LAN (optional),
Mobile broadband: UMTS, EDGE, etc. (optional)
4 BNC ports
2 stereo phone jacks to 4 RCA ports
1 RCA port
RJ-45, 10/100 Mbps
2 ports (USB 2.0)
12V, 1.35A, (19.2W Max.)
-20 °C ~ 55 °C / -4 °F ~ 131 °F
0 ~ 85% RH (non-condensing)
Dimensions (L x W x H)
174 x 145 x 40 mm / 6.85 x 5.7 x 1.57 in
0.73 kg / 1.61 lb
The GV‐Video Server cannot work with the microphones that acquire power from the unit. Use microphones that have external power supply.
Currently, 3 TB hard disk is not supported.
The GV-Video Server does not support Internet Explorer 10.
It is not recommended to use the flash USB drive with GV-VS04H and GV-VS14 because of its slow read and write speed.
Product design and specifications are subject to change without notice.
Optional devices can expand your GV-Video Server's capabilities and versatility. Contact your dealer for more information.
The GV-GPS Receiver is a Global Position System receiver. With the GV-GPS Receiver, you can perform GPS tracking and location verification of the GV-Video Server. Two types of interfaces are available: UART (for GV-VS04H / GV-VS14) and RS-232 (for GV-VS12).
The GV-VR605A is a voltage regulator designed to be installed in the car and supply power to GV-Video Server and its connected cameras. The GV-VR605A is capable of maintaining a 12V voltage to the GV-Video Server and its connected cameras, providing protection against voltage spikes when you turn on the car ignition.
The following devices are only supported by GV-VS04H and GV-VS14.
Access Control Series
The GV-Video Server can work with the Wiegand-interface card reader to send cardholder data to the central monitoring stations Center V2 and VSM, as well as GV-System.
The GV-R1352 is a card reader designed to recognize identification cards. Featured with the Wiegand output, the unit can be connected to any standard access control panel. The GV-R1352 comes with a weather sealed and IP66 compliant housing for outdoor use.
DC Male-to-Male Cable (for powering on the camera through GV-Video Server) x 1
Power Adaptor x 1
Wall Hook x 1
Conical Anchor x 4
Screw x 4
3.5 mm Stereo to RCA Cable x 2
GV-Video Server Software CD/DVD x 1
GV-NVR Software CD/DVD x 1
Note: The DC Male-to-Male Cable is used to power on the camera through the GV-Video Server. You can also optionally purchase three more DC Male-to-Male Cables and one DC 1-Male to 4-Female Cable to power on four cameras through the GV-Video Server.