Which OS/software version is compatible with my GV card?

GV-VMS, Multicam, Remote Viewing apps

Which OS/software version is compatible with my GV card?

Postby UVS_Frank » July 8th, 2011, 9:01 am

Refer to the chart below to locate compatible Windows OS and software versions according to the GeoVision card's hardware version (hardware version printed on the card itself):

If the chart says 8.5.8, then the card will work with up to the latest GV-DVR/NVR.

For Windows 10 32 / 64-bit compatibility
Only the capture cards which are currently being manufactured by GeoVision are guaranteed to work on Windows 10 32/64 bit
Click here to view the capture cards which are guaranteed to work with Windows 10

If you are unsure what version capture card you are using:
  1. Remove the card from the PC motherboard and see what is printed on the white sticker on the card
  2. Check the Windows Device Manager to see what you see listed under DVR Devices.
    'B' cards would show something like page 6 and 7 here http://pd.geovision.tw/datasheet/Guide/GV-678B-InstallationGuide.pdf
    'A' cards would appear as shown here http://php.gvdip.com/phpbb3/viewtopic.php?f=160&t=1836
    'A' cards (with the exception of GV900A - which is Windows 10 32/64-bit compatible) are compatible with 64bit OS but only tested up to Windows 8 64bit.
    If you do not see either example as shown above, this means you are not using an 'A' or 'B' card, and can only support Windows 32-bit OS and has only been tested with up to Windows 8 32bit.

Hardware Compatibility Chart
Update_2014_1_Hardware Compatibility.pdf
(143.15 KiB) Downloaded 3884 times
Posts: 240
Joined: June 28th, 2011, 4:01 pm

Return to GV-VMS & GV-DVR/NVR

Who is online

Users browsing this forum: No registered users and 1 guest